Matki Bespoke Showering
Luxury in the bathroom is no longer limited to standard shapes and sizes. Through EauZone Plus Bespoke, Matki offers countless possibilities for fitting elegant showering solutions in even the most challenging of spaces. Whether you are working on installing a Shower Enclosure in a loft conversion, want to increase Shower Enclosure height or would like to fit a Shower Enclosure over a dwarf wall or bath, Matki can work with you to plan a design that is tailored to your exact requirements and preferences. All EauZone Plus units are available to order in a range of special metallic finishes and many can be designed with EauZone Plus Ultra Bespoke minimal or recessed framing and thresholds for a purely frameless appearance. There are also a number of striking glass finishes available including Low-Iron, Bronze Tinted, Ultra Black and Satin Frosted.
An efficient and hassle-free Measure and Installation offering is provided by Matki Installations; our own expert fitting team backed up by our specialist draughtspeople. This service should be used for all frameless, recessed channel and minimal framed units and is optional for standard setups in EauZone Plus and other Matki collections.
Increased Height
With Matki Bespoke, increased height doors and panels can be made to reach the ceiling or to create higher, more impressive bespoke versions of standard EauZone Plus Shower Enclosures, Wet Room Panels and Bath Screens.
Additional hinges and brackets may be required dependent on setup and height desired.
Dwarf Wall
Bespoke glass with cut-outs to suit dwarf walls is available with a number of framed options as shown below or for a more minimalist look is achievable with minimal frames, recessed channels and sometimes with no frames at all.
Dwarf Wall Frame With 90° Off-Set Edge Connector
MATERIALS: 10mm Safety Glass with Aluminium Frames joined with an off-set Brass frame connector.
DESCRIPTION: The off-set Brass frame connector is used to form the joint between frame sections of the Side Panel and Inline Panel on EPIC or EPWC models. This allows for a dwarf wall to come out in line with the front of the enclosure.
DIMENSION: Frame width 20mm. Frame height 22mm. Brass frame connector length 44mm as pictured or 75mm to allow for a narrow shelf on the top of the dwarf wall.
Dwarf Wall Frame With 90° Frame Connecter
MATERIALS: 10mm Safety Glass with Aluminium frames joined by a Brass frame connector
DESCRIPTION: Smoothly finished Brass frame connector for a distinct and precise 90° joint between Aluminium frame sections.
DIMENSION: Frame width 20mm, Frame height 22mm. Minimal width of vertical ‘leg’ of glass is 150mm.
Dwarf Wall Frame, 90° Frame Connector & Corner Connectors
MATERIALS: Aluminium frame with Brass frame connector
DESCRIPTION: 10mm solid Safety Glass with 22mm Aluminium frames joined by vertical and horizontal Brass frame connector.
DIMENSION: Bespoke dimensions of frame to suit your bathroom
Dwarf Wall with Mitred Corner
MATERIALS: 10mm solid Safety Glass with 22mm Aluminium frame.
DESCRIPTION: A mitred corner is cut into the frames to form a neat joint between horizontal and vertical frames around a dwarf wall.
DIMENSION: Frame width 20mm, frame height 22mm. Minimal width of vertical ‘leg’ of glass is 150mm.
Angled Cut
Precise angled glass is made to measure for sloping ceilings and angled walls. A choice of framed and frameless solutions is available for the angled sections.
Frameless Angled Cut
MATERIALS: 10mm Safety Glass and wall bracket if required
DIMENSIONS: Gap of approximately 10mm between glass edge and wall.
Framed Angled Cut
MATERIALS: 10mm solid Safety Glass with Aluminium frame
DIMENSIONS: Available with 28mm wide frame, 11mm wide frame and recessed channels for angled cut.
Wall Frames
Standard Wall Frame
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: Allows for some adjustment in situations with out-of-plumb wall.
DIMENSION: 28mm
Minimal Wall Frame
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: Minimal wall mounted profile for an almost frameless look. Measure and Installation is required.
DIMENSION: Width = 11mm
Recessed Wall Frame
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: Comprising a first fix section to be fitted prior to tiling and a neat cover profile. Recessed channels achieve a luxurious appearance whilst assuring the practicality and the water retention of a standard frame. Measure and Installation is required.
DIMENSION: Visible section, on inside and outside of shower area respectively, is 1.5mm deep and 7.5mm wide.
Threshold Frames
Standard Threshold
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: The standard threshold used across the Matki EauZone Plus range is beautifully engineered to create a stylish barrier with excellent water retention.
DIMENSION:
Height = 20mm
Frameless Threshold
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: The standard threshold used across the Matki EauZone Plus range is beautifully engineered to create a stylish barrier with excellent water retention.
DIMENSION:
Height = 20mm
Recessed Floor Channel With Flush Chrome Infill
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: A recessed channel with a neat flush silver infill improves water retention while giving a flush entry to the Shower Enclosure. The infill interacts with a special door seal to give spray protection but does not assure complete water retention when water pools within the showering area.
Retro fit Threshold Bar For Tiled Entry
MATERIALS: Aluminium in a choice of finishes
DESCRIPTION: Bespoke length profile which can be retrofitted to a tiled threshold to improve water retention if required.
DIMENSION: Bespoke length
Hinges & Wall Brackets
We have adapted the EauZone Plus non-slip hinge to work with each of our Framing systems and for the exact opening required for your layout, whether that be outward or inward opening, panel-mounted or wall-mounted.
A variety of EauZone Plus wall brackets are available to support different bespoke glass sizes, shapes and setups.
Standard Panel Mounted Hinge
MATERIALS: Solid Brass patented non-slip hinge
DESCRIPTION: Outward opening hinge for use with standard 28mm frame on standard or bespoke door glass.
DIMENSION:Width 249mm, height 58mm
Panel Mounted Hinge – Inward Opening
MATERIALS: Solid Brass patented non-slip hinge
DESCRIPTION: Inward opening hinge to fit standard or bespoke glass.
DIMENSION: Width 250mm, Height 58mm
Standard Wall Mounted Hinge
MATERIALS: Solid Brass patented non-slip hinge available in a choice of finishes.
DESCRIPTION: Outward opening hinge for use with standard 28mm frame on standard or bespoke door glass.
DIMENSION: Width 137mm, height 58mm
Ultra Bespoke Wall Mounted Hinge – Outward Opening
MATERIALS: Solid Brass patented non-slip hinge, available in a choice of finishes.
DESCRIPTION: Outward opening hinge for use with Ultra Bespoke minimal and recessed frames. This hinge requires bespoke door glass and Measure and Installation.
DIMENSION: Width 137mm, height 58mm
Ultra Bespoke Wall Mounted Hinge – Inward Opening
MATERIALS: Solid Brass patented non-slip hinge
DESCRIPTION: Inward opening hinge for use with Ultra Bespoke minimal and recessed frames. This hinge requires bespoke door glass and Measure and Installation.
DIMENSION: Width 138mm, height 58mm
Standard L-Shaped Bracket
MATERIALS: Solid Brass Bracket available in a choice of finishes
DESCRIPTION: L-Shaped Bracket for securing the glass to the wall. Fitted on top of fixed panels for all frame types.
Wall Bracket for Standard Frames
MATERIALS: Solid Brass bracket, available in a choice of finishes
DESCRIPTION: This bracket is specifically for use with the 28mm standard frame where the standard L-Shaped Bracket cannot be used due to length or width restrictions or angled ceilings. Its footprint on the wall is no wider than the standard frame.
DIMENSION: 28mm wide frame. Bracket width 54mm, height 44mm. The wall bracket for 28mm frames requires bespoke glass.
Wall Bracket With 11mm Minimal Wall Frames
MATERIALS: Solid Brass Bracket available in a choice of finishes
DESCRIPTION: This bracket is specifically for use with the 11mm minimal frame where the standard L-Shaped Bracket cannot be used due to length or width restrictions or angled ceilings.
DIMENSION: Width (visible) 53mm
Wall Bracket With Recessed Frames
MATERIALS: Solid Brass Bracket. Available in a choice of finishes.
DESCRIPTION: This bracket is specifically for use with the recessed frame, where the standard L-Shaped Bracket cannot be used due to length or width restrictions or angled ceilings.
DIMENSION: Width = 67.5mm.
Finishes
A range of special metallic finishes for all frames, brackets, handles and hinges are available in EauZone Plus. Special glass finishes can also be chosen for most products
Silver Frame
MATERIALS: Aluminium frames for EauZone Plus Hinged, Quintesse, Bath Screens and Selected Wet Room Panels in Silver finish as standard.
DESCRIPTION: Vertical and Horizontal frames in this finish
Nickel Frame
MATERIALS: Aluminium frames for EauZone Plus Hinged, Quintesse, Bath Screens and Selected Wet Room Panels in Nickel finish for Polished and Brushed Nickel variants.
DESCRIPTION: Vertical and Horizontal frames in this finish. The same Nickel finish frame is used for Polished and Brushed Nickel options.
Gold Frame
MATERIALS: Aluminium frames for EauZone Plus Hinged, Quintesse, Bath Screens and Selected Wet Room Panels in Gold finish for Gold and Brushed Gold variants.
DESCRIPTION: Vertical and Horizontal frames in this finish. The same Gold finish frame is used for Gold and Brushed Gold options.
Finishes For EauZone Plus Hinged,Bath Screens and Selected Wet Room Panels
Available for Hinged, Quintesse, Bath Screens and Selected Wet Room Panels
Polished Chrome
Brushed Nickel
Polished Nickel
Brushed Gold
Polished Gold
Finishes For EauZone Plus Slider, Curved And Selected Wet Room Panels
For Sliding configurations, Wet Room Panels, Bath Screens and Curved.
Polished Chrome
Polished Nickel
Polished Gold
Brushed Steel
Special Glass Finishes
All EauZone Plus glass is 10mm or thicker. Special glass finishes are available on most models.
Accessories
Linear Towel Rail – LTR
Linear Towel Rail for doors with pull handle on inside in 400mm and 700mm lengths, or for fixed panels with outer rail only in 400mm, 700mm and 1000mm lengths. 1000mm variant has third centre fixing.
Traditional Towel Rail – TTRDS
Double sided towel rail. Available in sizes up to 700mm.
Curved Towel Rail – CTRDS
Double-sided Towel Rail. Available in 700mm length only.
Linear Hardwood Towel Rail – LWT
Linear Towel Rail for doors with pull handle on inside in 400mm and 700mm lengths, or for fixed panels with outer rail only in 400mm, 700mm and 1000mm lengths. 1000mm variant has third centre fixing.